Are you having trouble with your AirPods Pro? Don’t worry, sometimes they just need a reset! Whether you’re experiencing low sound quality, wonky Bluetooth connectivity or other issues, resetting your AirPods can often do the trick. But how exactly do you reset them? Don’t worry – I’m here to help!
In this article, I’ll show you step-by-step instructions on how to factory reset your AirPods Pro in no time. From what tools and items you will need for the process, to troubleshooting tips if something does not work as expected – everything is covered in detail. So if you’re ready to get back up and running with our beloved wireless earbuds again let’s dive right into it!
So, How to factory reset airpods pro 1. Open the charging case lid and press and hold the setup button on the back of the case for at least 15 seconds.
2. The LED light inside will flash white, indicating that your AirPods Pro have been reset to their factory settings.
3. Close the lid and wait until your AirPods Pro are fully charged before using them again.
Read also: can airpods pro connect to ps5?
How to factory reset airpods pro
If you’re looking to factory reset your AirPods Pro, this step-by-step guide with pictures is here to help. First, open the charging case and make sure that both of your AirPods are inside. Then press and hold the setup button on the back of the charging case until you see a white light flash three times. Next, go to your device’s Bluetooth settings and select “Forget This Device” for both left and right Airpods. Finally, put the earbuds back in their case and wait for 30 seconds before opening it again – this will complete the factory reset process!
Read also: can airpods go through the wash?
Step by step instructions To Perform a Full Factory Reset of Your AirPods Pro
Step One: Put Your Airpods Pro Into Reset Mode
The first step in resetting your AirPods Pro is to put them into reset mode. To do this, press and hold the setup button on the back of your charging case until you see a white flashing light appear on your LED indicator. Once you’ve done that, release the button and wait for 10 seconds or so; once finished, your AirPods will be ready to be reset.
Step Two: Connect Your Airpods To A Device
Once you have successfully placed your AirPods into reset mode, it’s time to connect them to an Apple device such as an iPhone or iPad. Open up the Bluetooth settings on whichever device you are using and make sure that Bluetooth is turned on and available for use by other devices. Then find “AirPods” under Available Devices list and select it – from here, just follow any instructions given by the system until they are successfully connected with each other; once all set up properly then move onto next steps.
Step Three: Erase Your Earphones
Now that everything has been connected properly its time to erase all data associated with these earphones which will perform a full factory reset of them; in order to do this open up Settings app again but now go into General tab > Reset > Reset Network Settings > Enter Passcode if asked (This might require entering Apple ID information) And finally hit confirm & wait for few minutes while process completes successfully! After completion remove connection between devices & turn off bluetooth by going back to bluetooth settings page where “airpods” should no longer be visible – indicating successful erasure of data from both ends!
Verifying that Your AirPods are Fully Reset
First step: After you’ve fully reset your AirPods, the next step is to verify that they have been successfully reset and are working properly. To do this, you must first make sure your device is powered on and that both of your AirPods are connected to it. If they aren’t connected yet, simply put them in their charging case and open the lid to connect them.
Second Step: Once both of your AirPods are connected, check for a few key indicators such as sound quality and battery life. For sound quality, play some music or other audio files from any streaming service or streaming platform. Make sure that the audio coming out of each earbud is clear with no audible static or distortion when compared side-by-side with a wired headphone set.
Third Step: Next up – checking battery life! This can be done by accessing either the “Battery Life” menu within iOS settings or at anytime directly through the control center by pulling down from the top right corner on an iPhone X/XS series iPhones . Here you should see two separate entries for each individual AirPod showing its remaining charge level in percentage form as well as how much time has left until full discharge after being used continuously before needing another recharge cycle back into its charging case if needed .
Re-Pairing your AirPods with Your Device After a Factory Reset
So you’ve done a factory reset on your device, and now you’re wondering how to reconnect your beloved AirPods. Take a deep breath! There’s no need for any tech wizardry or expert gadgets knowledge here — it’s actually pretty straightforward. Returning your device to its default settings can create an apparent rift between it and previously connected devices, just like your AirPods. The good news is that this isn’t permanent. A few simple steps will reestablish the connection quicker than you might think.
- The first thing you’ll need to do is open the Lid of the AirPods case with both air pods tucked inside tightly.
- If they’re not already in there, gently place them in their respective slots within the case.
- You’ll then hold down that small button at the back of the charging case until it starts flashing white — this signals Bluetooth pairing mode!
- In response to this, go into ‘Settings’ on your device, hit ‘Bluetooth,’ and voila – ‘AirPods’ should appear under “Other Devices.”
Last Step: Tap on those babies, watch as they jump from ‘Other Devices’ to ‘My Devices,’ signifying a successful bond has once again been formed between them and your device.
Suddenly everything seems right in our digital universe again! No more silence or pesky wires getting tangled up when all we want are our favorite tunes pumping directly into our ears via those magical little buds called AirPods. Remember always keep calm during such technical hiccups—there’s always a solution around if we stay patient and persistent enough!
Troubleshooting Common Problems During the AirPods Factory Reset Process
Understanding the AirPods Factory Reset Process
Let’s have a quick chat about those pesky problems that often crop up while attempting to reset Apple AirPods back to factory settings. It may seem like a simple operation, but trust me, it can be as fiddly and frustrating as trying to thread a needle in gloomy light. Now, if you’re experiencing any issues with your beloved wireless earbuds – maybe they aren’t connecting properly or perhaps the sound isn’t quite right – resetting them might just be what the doctor ordered.
Tackling Frequent Hitches During the Reset
Unfortunately, even this seemingly straightforward process can throw up its own set of hurdles. So let’s break down some of these common problems:
- Lack of Bluetooth Connectivity: You want to reset your AirPods but oh no! Your device won’t connect via Bluetooth? This could well be due to an outdated operating system or interference from other devices.
- Airpods Case Isn’t Charging: Another commonly encountered problem is when your case refuses stubbornly not charge even though it’s plugged into power. This could mean that your charging cable or adapter isn’t working correctly.
- Status Light Isn’t Working: If you’ve ever noticed that status light on your case refusing to blink or remaining obstinately off during reset, don’t panic! There are measures we can take for this too.
Remember folks – each one of these issues has its own unique solution which might require anything from updating software on connected devices to changing charging cables/adapters and more. We’ll dive deeper into these solutions next time around; so stay tuned!
Read also: Is airpods optimized battery charging good?