How To Reset AirPods Pro From A Previous Owner: Step-By-Step Guide

Published on:

Are you the new owner of a set of AirPods Pro? Congratulations! You have yourself one of the best and most uses wireless earbuds on the market today. But there’s just one problem: The previous owner likely never reset them. Don’t worry, though – it’s not hard to do, and I’m here to help you out so that your AirPods Pro are all ready for you to use!

In this article, we’ll go over everything you need to know about resetting AirPods Pro from their previous owners. We will cover how to check if they were already reset, what a factory reset entails, and step-by-step instructions for completing said process. With my expertise on this topic (I’ve done plenty of resets!), I can assure you that by the end of this article, your AirPods Pro will be good as new and just waiting for their newest owner – YOU! So let’s get started!
So, How to reset airpods pro from previous owner 1. Put your AirPods Pro in the charging case and make sure that both the left and right earbuds are inside.
2. Close the lid of the charging case and wait for at least 15 seconds until you hear a chime sound indicating that it has been reset successfully.
3. Open up your device’s Bluetooth settings, select “Forget This Device” from the list of connected devices, then turn off Bluetooth on your device completely by swiping down from the top right corner of your screen (for iOS) or tapping on “Bluetooth” in Settings (for Android).
4. Turn back on Bluetooth on your device, open up its Bluetooth settings again, then select “AirPods Pro” to connect them with your device once more.

Read also: can airpods be recycled?

How to reset airpods pro from previous owner

Resetting AirPods Pro from a previous owner is easy and can be done in just a few simple steps. First, make sure your AirPods Pro are turned off by pressing and holding the force sensor located on the stem of each earbud for at least 15 seconds until you see the LED light flash white. Next, open up Settings on your device and select “Bluetooth” to locate your AirPods Pro. Select them and then tap “Forget This Device” to remove them from your list of connected devices. Finally, press and hold both the force sensors simultaneously for at least 15 seconds until you hear an audible chime that indicates they have been reset successfully!


How To Reset AirPods Pro From A Previous Owner: Step-By-Step Guide

Read also: can airpods get a virus?

The importance of resetting AirPods Pro from a previous owner

When purchasing used AirPods Pro, it is essential to reset them from the previous owner.

It may be tempting to plug in a pair of used AirPods Pro and start using them right away. However, this could potentially lead to some serious security issues for the new user. By resetting the AirPods Pro prior to use, buyers can ensure that they will not be vulnerable to unauthorized access, data theft or malicious attacks.

Resetting your Airpods Pro entails completely erasing all of their stored settings and removing them from any accounts associated with their previous owner. It also requires disabling Find My device or iCloud services on both mobile devices and computers connected with the pods’ Bluetooth connection history. This will prevent any remote control attempts by a former user who still has access credentials saved for these services due to failing to erase those items before selling/giving away their device(s). Furthermore, you should delete all software updates related applications which were downloaded onto the AirPods while they were being used by someone else as these may contain malware which could compromise your phone’s security if linked with your account information.

Finally you must then factory reset your AirPod Pros in order for them function properly on your own devices without glitches or audio-related issues caused by residual pairing information left over from another user’s setup configuration; especially if different versions of iOS are installed across various mobile phones/tablets etc.. Additionally doing this allows you take full advantage of all features such as noise cancellation technology so that enjoy quality sound without interference from external sound sources controlled through old parameters still lingering within memory banks inside each pod even after disconnecting original connections made during past usage scenarios when owned by somebody else previously.

The steps involved in wiping out an Old Owner’s Data:

  • Delete content & settings
  • Erase iCloud/Find my Device service
  • Remove Software Update apps
  • Factory Reset

Step by step instructions To Reset AirPods Pro From A Previous Owner

1. Check the case:
The first thing to do when trying to reset AirPods Pro from a previous owner is to check the case. The charging case for AirPods Pro contains important information about its connection, so it’s important that you know everything about it before attempting to reset them. You should make sure that all of the connections are intact and not damaged in any way, and also check if there are any signs of tampering or unauthorized access on the outside of the case. If there is any indication of tampering or damage, you should proceed with caution as this could potentially void your warranty or prevent you from successfully resetting your AirPods Pro altogether.

2. Locate & Connect With Your Device:
Once you have confirmed that everything looks good with your charging case, you will need to locate your device and connect it with yours. This can be done by turning on Bluetooth in both devices (your phone and AirPods) and then searching for devices nearby using “Settings” menu option on either device (or through an app like Find my iPhone). Once connected, proceed with step 3 below.

3 Reset Your Airpods:
After connecting both devices together, go back into Settings > General > Reset > Erase All Content And Settings . Confirm this selection by selecting “Erase Now” once prompted – this will effectively erase all settings associated with previously owned account/device pairs while maintaining your current pairing information intact on both endpoints (iPhone & AirPods). Finally follow up by restarting both devices separately before reconnecting them again via Bluetooth within their respective apps or settings menus – doing so should ensure complete transfer of ownership data between two parties while ensuring no residual data remains behind from previous user(s).

Tips for Troubleshooting any issues encountered during or after Airpods resetting process

Tip One: Make Sure Your Airpods Are Fully Charged

The first thing to check when you’re experiencing issues with resetting your AirPods is the battery level of both your earbuds and their case. Sometimes people tend to overlook this simple yet crucial aspect. If any of them are running low, they might not function optimally during the reset process, giving rise to multiple problems. Always ensure that your AirPods and charging case have ample charge before a reset attempt. Plug them in for about an hour or so before trying again – it’s surprising how many issues a good power boost can solve!

Tip Two: Confirm Stable Bluetooth Connection

Your next checkpoint should be the strength and stability of your Bluetooth connection (considering that air-pods use Bluetooth technology for connectivity). Many times, devices aren’t connecting properly because there’s something interfering with the signal – maybe other nearby devices or even physical barriers like walls or furniture between your AirPods and the device it’s paired with. Try moving closer to ensure a stronger connection; alternatively, disconnect all other active Bluetooth connections for best results.

  • Note: You may also want to consider restarting your primary device (iPhone/Android) as sometimes, software bugs can interfere with its ability to detect and connect via Bluetooth.

Beyond these tips, if you’re still having trouble after resetting your AirPods – don’t despair! Remember that Apple has a superb customer service department ready to assist you further in troubleshooting any persisting issue.

Read also: How to factory reset airpods pro