How To Reset Used AirPods Pro I Bought: Step-By-Step Guide

By John Adebimitan

Have you recently purchased a used pair of AirPods Pro and are not sure how to reset them for your own use? Don’t worry, I got you covered! As someone who has been researching and experimenting with Apple products for years, I can tell you that resetting used AirPods Pro is far simpler than it seems. In this article, I’m going to guide you through the exact steps on how to quickly and easily reset your newly bought AirPods Pro.

By the end of this article, not only will you know exactly how to successfully reset your AirPods Pro but also have peace of mind knowing they are now ready for optimal functionality. This step-by-step guide will help ensure that your AirPods Pro experience is as seamless as possible – so don’t worry! Let’s jump right in and get started on How To Reset Used Pairs Of AirPods Pro!
So, How To Reset Used AirPods Pro I Bought

Read also: can airpods overcharge?

How To Reset Used AirPods Pro I Bought

To reset your used AirPods Pro, you will need to follow these steps:
1. Open the lid of the charging case and press and hold the setup button on the back of the case for at least 15 seconds until you see an amber light flashing.
2. With your device nearby, open Settings > Bluetooth on your iPhone or iPad, then tap “Forget This Device” next to your AirPods Pro in the list of devices.
3. Place both AirPods back into their charging case and close it for 10 seconds until a white light appears inside it indicating that they have been reset successfully.
4. Now open up Settings > Bluetooth again and select “Connect” next to your AirPods Pro in order to pair them with your device once more!

How To Reset Used AirPods Pro I Bought: Step-By-Step Guide

Read also: can airpods be in a sauna?

Step-by-step Instructions on How to Factory Reset AirPods Pro

Begin with the Basics
Starting off, you need to ensure that your AirPods Pro are within close proximity to your iPhone. This is because the reset process involves communicating between the two devices via Bluetooth. To start resetting, open up your iPhone’s lid and place both of the earbuds inside their charging case. Now, there’s no rush here – take a moment and wait until you notice a light glowing on its front. If it’s flashing white, then congrats! Your AirPods Pro are in pairing mode now.

Moving Forward

  • The next step might be slightly tricky – so pay attention! Take your iPhone in one hand and go into ‘Settings’. Select ‘Bluetooth’ from this menu.
  • In this sub-menu, identify ‘Airpods Pro’ listed under ‘My Devices’. Tap on (i) icon next to it for more options.
  • You’ll spot an option that says ‘Forget This Device’, tap on it without hesitation. A prompt will appear asking if you’re sure about what you’re doing; select yes.
  • Your final task lies back with the charging case – press and hold onto the small button located at its rear end for approximately fifteen seconds or till when an amber colored light begins flashing—a clear indication that factory settings have been successfully restored!

The key takeaway? Though initially daunting, these steps make bringing back those as-good-as-new vibes pretty effortless indeed!

How To Reset Used AirPods Pro I Bought

Troubleshooting Common Errors During the AirPods Pro Reset Process

Resetting your AirPods Pro is usually a fairly straightforward process, but occasionally you might come across an issue or two. One common error that could occur is when your AirPods Pro won’t reset. This can be quite frustrating, especially if you’re dealing with connectivity issues or sound inconsistencies. If this ever happens to you, start by checking the basics – ensure both AirPods are in the charging case and that it has enough charge (ideally more than 50%). Also, double-check that your iPhone’s Bluetooth setting is turned on.

Sometimes though, even after doing these things right, resetting may remain an uphill task. The LED light not flashing white as it should during the reset process is another common problem people face. To rectify this issue:

  • Ensure the lid of the charging case is open while pressing and holding down its back button for at least 15 seconds until the LED flashes amber then white.
  • If this step doesn’t help resolve it, disconnecting and reconnecting them from/to your device’s Bluetooth settings often does wonders.
  • In extreme cases where none of these workarounds seem to help get past these challenges, reaching out to Apple Support may be necessary; they have seasoned professionals who can walk you through additional steps tailored towards resolving such unique challenges efficiently.

Remember! Never allow technology glitches to rob you off your cool – turn every hurdle into a learning opportunity!

Reconnecting your AirPods Pro After a Successful Reset

Resetting your AirPods Pro is somewhat similar to starting afresh with a new device. It’s like moving into an untouched home where you need to reconnect all utilities but this time, in the world of tech. Here’s how it goes: once you’ve had a successful reset of your AirPods Pro, they’re no longer aware of their previous alliance with your devices. Consequently, it becomes vital for you to reconnect them.

Begin by opening the charging case that cradles your AirPods Pro – be sure not to remove the earbuds just yet. Now, access the Bluetooth settings on your preferred device (this could be anything from an iPhone or iPad, to a Mac). Once there:

  • Select ‘AirPods Pro’ from the list of available devices,
  • Sit back and watch as a connection establishes itself between both parties.

This process might seem simple enough but remember that technology can sometimes have odd quirks and glitches which necessitate patience and persistence! If at first you don’t succeed, give it another go – remember, these are brand new connections being formed!

How to Verify If The AirPods Pro Has Been Successfully Restored To Factory Settings

Checking Your AirPods Pro’s Status
To make sure your AirPods Pro have been successfully restored to factory settings, there are a few steps you need to follow. First, you’ll want to grab your iPhone or other Apple device and open the Bluetooth settings menu. Here, you should see your AirPods listed as available devices – but take note! If they’ve been properly reset, their name will revert back to the default “AirPods Pro”. Any custom moniker that was given prior will no longer be displayed.

Finding More Signs of Successful Restoration

Let’s delve a bit deeper into verifying that our AirPods Pro has indeed returned to its original state. You can do this by connecting them once again with your Apple gadget and playing some tunes. Pay close attention here – if certain features (like Noise Cancellation) were previously deactivated but now seem active again or vice versa, it’s another clear sign that the reset process worked effectively.

  • Another great indicator is battery life.
  • If after resetting, there is an apparent improvement in charging efficiency or uptime between recharge sessions,

this suggests that any software glitches affecting power management have likely been wiped clean along with all other data during restoration.

Read also: Are AirPods 1 And 2 The Same Size Case?

About The Author