Are you having trouble connecting your AirPods to your device after you’ve chosen “forget this device”? You’re not alone. We have all been there at one point or another, trying desperately to figure out why our beloved AirPods won’t connect. It can be so frustrating and confusing- trust me, I know! But the good news is that I’m here to help ease your worries by giving you the step by step run down of how to get them connected again in no time.
Through my personal experience as well as hours of research into technology and audio devices, I will provide a detailed guide on what needs to be done when experiencing connection issues with your Airpods after forgetting a device. Whether it’s an iPhone, Macbook, or any other Bluetooth enabled product; this article has got you covered! So don’t worry – let’s get started and restore those precious connections with your AirPods!
So, Why are airpods not connecting after forget this device? If you have forgotten your AirPods and are having trouble connecting them to a device, the first step is to reset your AirPods. To do this, press and hold the setup button on the back of the charging case for at least 15 seconds until you see an amber light flashing. Then open up Bluetooth settings on your device and select “Forget This Device” for both left and right AirPods. After that, try pairing again with your device by pressing the setup button once more until you see a white light flashing.
Read also: can airpods be returned?
Why are airpods not connecting after forget this device?
If you are having trouble connecting your Airpods after ‘forgetting this device’ it could be due to a number of reasons. Firstly, make sure that the Bluetooth on both devices is enabled and that they are in close proximity to each other. If this doesn’t help, try resetting your Airpods by pressing and holding the setup button for at least 15 seconds. Finally, if all else fails you may need to unpair all of your Bluetooth devices from one another and then re-pair them again. This should fix any connection issues between your Airpods and other Bluetooth devices.
Read also: can airpods be stolen and used?
Potential Reasons Why Airpods Won’t Connect After Forgetting The Device
The Fundamental Problem: Outdated Software or Firmware
One of the most common reasons why AirPods won’t connect after forgetting a device is because of outdated software or firmware. When pairing an Apple device with AirPods, the latest version of iOS needs to be installed on both devices for them to communicate correctly. If either one is out of date, it can lead to connection issues and result in your AirPods not connecting after being forgotten.
Compatibility Issues Can Also Cause Problems
Another possible reason for connection problems is due to compatibility issues between the two devices. Bluetooth usually works best when used with compatible hardware but some users have experienced difficulty getting their Airpods and other Apple devices to pair properly as they are sometimes incompatible with each other. This can lead to difficulty connecting even if everything else seems up-to-date and functioning normally.
Other Possible Reasons For Connection Issues
Apart from outdated software or firmware, there are several other potential reasons why Airpods won’t connect after forgetting a device such as:
- The signal strength may be too weak.
- There could be interference from other nearby signals.
- The battery might need replacing.
. In addition, users should make sure that their distance from the paired device does not exceed 10 meters as this could also cause communication difficulties when attempting to reconnect after forgetting the initial setup.
Steps To Troubleshoot Your Airpods Connection Issues Post ‘Forget This Device
Part 1: Check Your Bluetooth Settings
When troubleshooting your Airpods connection, the first step is to check if you have enabled Bluetooth on both the device and your phone. If it’s been disabled on either one, no matter how many times you check for a connection, nothing will happen. To confirm that Bluetooth is turned ON:
- For iPhone users – head to your ‘Settings’ app and select ‘Bluetooth’. Toggle the switch next to ‘Bluetooth’ so that it turns green.
- For Android users – head to your settings menu and select ‘Connected Devices’ or something similar. Toggle the switch next to ‘Bluetooth’ so that it turns blue.
Once confirmed, try connecting again by following these steps:
- Place AirPods in their charging case
- Open case lid
- Tap pair in settings of connected device (iPhone/Android)
Part 2 : Power Cycle The Device And Charging Case
If checking your bluetooth setting doesn’t work then try power cycling both devices before attempting another connect attempt. This can be done easily by simply turning off each device for 30 seconds then powering them back up again – starting with the charger first. You should also consider resetting network connections as sometimes this helps too.
It might also help if you remove any other active bluetooth devices from within range as this could interfere with the signal strength.
Lastly make sure that both airpods are fully charged before attempting another pairing session!
Part 3 : Reset The Network Settings And Fully Recharge The Earbuds strong >< br / > Once all of these steps have been taken, go ahead and reset any active networks being used such as WiFI or cellular data from within each device’s respective settings menus. After completing this task, close out of all applications running in order to ensure they don’t interfere with a successful pairing session.< br /> Lastly charge up each earbud completely until they indicate full battery power – typically depicted through green LED lights in most cases – before attempting yet another connect attempt!
Read also: How to know if your airpods have been reset