Are you noticing that your AirPods are not as loud as they used to be? You’re not alone- it’s a common issue, and there are many possible causes. I’ve been dealing with this exact issue myself for the past few months, having tried all sorts of fixes myself before discovering what worked best.
In this informative article, I’ll talk about what could be causing your AirPods to have weakened audio quality and sound muffled or quiet. We’ll go over some of the most common reasons why this might occur and also discuss other potential solutions that can help restore your listening experience. By the end of reading this, you will have proper guidance on how to get back crystal clear sound from your AirPods! Are you ready? Let’s dive in!
So, Why are airpods not loud anymore? AirPods may not be loud anymore because the battery is low, the sound settings are incorrect, or there is a problem with the hardware. To fix this issue, check your AirPod’s battery level and adjust the volume settings on your device. If that doesn’t work, try resetting your AirPods or replacing them if necessary.
Read also: why is my airpod case beeping?
Why are airpods not loud anymore?
Airpods are not loud anymore because the sound may be muffled due to dirt, debris or moisture that has built up in the earbuds. To fix this issue, you should clean your Airpods with a soft cloth and make sure they are completely dry before using them again. If cleaning doesn’t work, then it could be an issue with the battery life of your AirPods. Try charging them fully and see if that helps restore their volume levels back to normal.
Read also: can airpods be connected to xbox?
Causes of reduced AirPods volume:
One of the most common causes of reduced AirPods volume is simply that the device isn’t playing at a loud enough level. This can often happen when users are using their device in a noisy environment, and need to increase the volume to hear properly. In this situation, it’s recommended to turn up the volume on your device as far as possible without causing any distortion or cracking of sound.
Another reason for reduced AirPods volume could be that they are not getting sufficient power from their paired device. It might be worth trying different devices if you have them available, just to see if this makes any difference. Additionally, try plugging them into an external speaker with an aux cable to make sure there is no issue with the headphones itself.
Lastly, it’s possible that dust has entered your AirPods and is affecting its performance by blocking some of its ports where sound waves should pass through easily normally. To fix this issue, use compressed air or a soft cloth dampened with rubbing alcohol to gently clean out any debris from these areas and allow soundwaves unrestricted access again.
Remember:
- Turn up audio on phone/device.
- Try using other devices.
- Plug into external speakers.
- Clean ports with compressed air/alcohol damped cloth.
.
Troubleshooting steps for fixing low AirPods volume
Headphone Volume Settings
When your AirPods are not producing enough volume, the first step is to check the headphone volume settings on whichever device you’re using. It might be that the audio source isn’t set loud enough. Depending on which type of device you’re using, like an iPhone or Android phone, there could be a different way to adjust the volume settings. On iOS devices for example, if you swipe up from the bottom of the screen and click on ‘volume’ it will take you to quick access menu where you can toggle between media sound and ringer sound as well as adjusting each to any level between 0-10.
Once this has been checked and adjusted according to preference but still yields unsatisfactory results then further troubleshooting steps may need to be taken. One thing that can help with low quality output is cleaning out your AirPods both inside and outside; extended use can cause dust etc build up in all kinds of hard-to reach places so make sure they get a good thorough clean every few weeks – make sure there’s no moisture left in them afterwards too!
Check Connectivity
If after checking/adjusting all sound levels, cleaning your AirPods thoroughly, and still facing low sound problems then it could indicate an issue with connectivity rather than something wrong with just one component of hardware or software. In other words it could mean that either one or both earpieces aren’t connecting properly – sometimes this means having to re-pair them by going into Bluetooth settings on whatever device you have connected them too (iPhone/Android etc). You should also try disconnecting them from any other devices they are paired with before attempting another connection as this will ensure that nothing else interferes during pairing process thus increasing chances of successful reconnection without interruption from another third party connection.
